156x120 Phifer SunTex 90 Shade Solar Shade Order Form

Order A Solar Shade

Room/Window Name:

Inside mount blinds and shades are installed inside the window casing. Provide exact window opening measurements as the factory will make deductions. There will be visible light gaps on both sides to allow operating clearance.
Outside mount blinds and shades are installed outside the window casing, covering an area larger than the window itself. Provide exact shade measurements. Add a minimum of 1 1/2 inches to the width as the fabric is narrower than the roller at the top.

Measurements - Enter Size in inches ↔Width: Measure the top of the window across the horizon to determine window/shade width. Please refer to inside or outside mount instructions above.

↕Height Measure the left, center and right from top to bottom and take the shortest measurement as your specified height.

Lift Type

Adds $194-Cannot use Square Fascia

Adds $39

Choose Shade Color

Select a Color

Choose Chain Color if Applicable:

Chain Length:

Chain Location:

Bracket Color:

Other Options Standard roll means the fabric rolls off the backside of the tube. Reverse Roll option is so the fabric rolls off the front of the tube. Reverse Roll is available at no charge, but is not compatible with the cassette valance option. NOTE: For optimal privacy and light control, Standard Roll should be used.
Standard Roll Reverse Roll

Order Custom Roller Shades

Item #857415 Phifer SunTex 90 Shade