Do it Yourself Instructions: Wall Mount Installation for Plain (Light) Curtains

1. Draw a line along wall or ceiling where drapery/curtain is intended. Measure the pre-drawn line, cut the track in length as needed with a hacksaw.


2. Install the wall mount cartridges 12 inch apart along the wall with lockable clips facing down. Additional cartridges may be needed at the end or at sharp turns.


3. Starting from one end, lock the track into cartridge one after another by pushing the clip on cartridge tightly against track (flat surface of track should be facing up). Do Not try adjust or bend the track- Curvature of the track will be formed automatically once the track is locked in place.




4. Cut off any slack length of track, insert rollers and 2 magnetic master rollers (optional) into the track. Once the rollers are inserted, place end cap on both ends of the track.



5. Hang the curtain onto the track rollers. You are now done!