Flat Fold Roman Shade
Item# 91046

Rings are sewn on the back of the shade horizontally every 8" to 10" and vertically every 5" to 6" equidistant across the shade to fit the finished size. The shade is drawn up with nylon cord threaded through the rings, across the back of the head-rail.

The Roman Fold shade dos not have a return as part of the shade face. If specifying this shade on a window where the side of the board will be showing, the use of a short flap falling vertically from the board creates a concealed return.

Fabric shades can have a continuous cord system to raise and lower the shade at various heights. This system is typically an add-on to the cost of fabricating the shade.

Measurement Tips
• Width – Measure the width of the window and add a minimum of 1" additional. The shade board will be exactly the width specified.
• Length – Measure a minimum of 2" above the window on an outside mount to allow for the bracket to clear the window frame.
Call 1-800-590-5844 or email us for more information and ordering.